SinceVision has introduced the SGI-N030W, a wide-spot laser displacement sensor intended for high-speed, non-contact dimensional measurement on rough, textured and irregular surfaces. The company says the sensor uses an expanded laser spot with optical triangulation to reduce the instability that conventional point-spot systems can encounter when surface finish varies.
The product extends SinceVision’s SGI Series and is aimed at lithium-ion battery manufacturing, semiconductor processing and precision mechanical engineering, where micrometre-level measurement is required. Conventional point-spot sensors concentrate reflected laser energy on a small area, so microscopic scratches, grain boundaries, brushed textures and matte finishes can produce signal variations that are interpreted as dimensional changes. SinceVision says such variations can lead to false defect warnings and additional inspection. The wide-spot configuration collects reflected light over a broader area and averages local microscopic peaks and valleys before signal conversion, reducing the influence of surface roughness and optical scattering on materials including drawn metals, sandblasted surfaces and coated battery foils.
Specifications and interfaces
The sensor has a 30 mm reference distance and a ±5 mm measurement range. SinceVision specifies repeatability of 0.05 µm on a diffuse white target under static conditions and linearity of ±0.02% of full scale across the range. A 50 kHz sampling frequency, equivalent to a 20 µs update interval, is intended to support high-speed measurement and monitoring of dynamic processes.
Communication options include RS485, 100Base-TX Ethernet and switchable analogue outputs for 4–20 mA current or 0–10 V voltage signals. Master-slave synchronisation allows two sensors to operate in opposition, measuring simultaneously from either side of a component or moving material.
Battery-electrode thickness inspection
One intended application is in-line thickness measurement of lithium-ion battery electrodes, where coating thickness and uniformity affect energy density, internal resistance and long-term cell stability. SinceVision says conventional offline inspection with contact micrometers or drop indicators can introduce operator variability and may deform wet or uncured electrode materials, while periodic spot measurements cannot provide continuous coverage across a production reel.
The proposed arrangement uses two synchronised sensors above and below a moving electrode web. Mounted on a calibrated, low-thermal-expansion marble gantry, the opposing heads measure their respective clearances to the material, and a controller combines those readings with the fixed mounting datum to calculate absolute thickness in real time. According to SinceVision, production trials demonstrated stable, repeatable thickness measurement within ±0.3 µm at a web speed of 300 mm/s. The company says the 50 kHz sampling rate provides longitudinal resolution for detecting localised coating agglomerations, edge thinning and exposed substrate before the material reaches cell winding.
Semiconductor and precision-assembly uses
The sensor is also intended for semiconductor manufacturing, where non-contact measurement is important for sensitive wafer surfaces. Possible applications include wafer position verification, edge detection, height measurement and checks of wafer seating and chuck alignment in atmospheric transfer modules and vacuum load-lock systems.
In precision assembly, the sensor can monitor the movement of voice coil motors, linear actuators and micro-steppers. Its 50 kHz sampling rate is intended to capture transient displacement, mechanical oscillations, settling behaviour and end-stop overshoot across the measurement range. Position data can be sent to machine control systems through the Ethernet interface for real-time monitoring and process control.
Jack Li, Global Sales and Marketing Director at SinceVision, says false defect warnings caused by surface texture remain a recurring challenge in battery manufacturing and precision assembly. He says conventional point-beam laser sensors can interpret microscopic scratches and rough coatings as actual thickness variations, slowing production lines and creating a need for manual inspection. According to Li, the SGI-N030W’s expanded optical spot is designed to average out those surface-related variations, while synchronisation between opposing sensor heads supports high-speed thickness verification.
