Chemicals

ArcelorMittal Gent carbon capture pilot exceeds 90% CO2 capture from blast furnace gas

Alessandra RicciNovember 2, 20265 min read2 views

At a glance

  • The first phase logged more than 4,500 operating hours across four partners and will feed engineering studies for a possible full-scale unit at the Belgian site.
  • A pilot applying MHI's Advanced KM CDR Process at ArcelorMittal's Gent steelworks captured more than 90% of the CO2 in a portion of blast furnace off-gas over 4,500 operating hours. Assessments based on the trial put the potential site-wide CO2 intensity cut at up to 24% if the technology is applied at full scale to the pre-combustion gas, with a second phase planned for the hot strip mill reheating furnace.
A blast furnace and hot strip mill linked by ducting to a modular carbon capture column, illustrating how capture equipment could be fitted into an existing steelworks.

A pilot carbon capture unit at ArcelorMittal's integrated steelworks in Gent, Belgium, has captured carbon dioxide from blast furnace gas at rates exceeding 90%, concluding the first phase of a trial run by four companies.

The test applied Mitsubishi Heavy Industries' (MHI) Advanced KM CDR Process to a proportion of the blast furnace off-gas and accumulated more than 4,500 hours of operational testing. Assessments based on the results indicate that applying the technology at full scale to the pre-combustion off-gas could reduce CO2 intensity at the Gent site by up to 24%.

The partners said the campaign generated the operational and engineering data needed to assess a possible full-scale application at the Gent blast furnace, and that extending capture across several emission points in the plant could support progress toward near-zero emissions intensity. The results are described as feeding updated engineering and deployment studies for future full-scale applications, not as a commercial deployment decision.

Contaminants and a partial capture

Blast furnace off-gas carries dust, sulfur-containing compounds and other contaminants, an environment the partners characterised as challenging for capture equipment. MHI said the campaign showed the Advanced KM CDR Process could operate under those conditions while producing data for commercial-scale design assessments.

In this phase only CO2 was captured. The off-gas also contains carbon monoxide, and the remaining carbon content in that form can still be used for power and heat generation elsewhere on the site, with CO2 released when the gas is combusted.

Second phase moves to the reheating furnace

Phase 2 will broaden the trial to multiple emission points, starting with post-combustion gases from the hot strip mill reheating furnace, which heats thick steel slabs to the temperature required for rolling into thin sheets. That furnace is fired with a blend of steelmaking by-product gases — coke oven gas, blast furnace off-gas and basic oxygen furnace gas — together with natural gas, presenting a different and more dynamic flue-gas profile for the capture technology.

Who does what

ArcelorMittal is facilitating the trial in Gent. MHI supplies its proprietary Advanced KM CDR Process and leads carbon capture process engineering and technical evaluation. BHP and Mitsubishi Development (MDP), which supply steelmaking raw materials to ArcelorMittal's European operations, are providing funding.

Frederik Van De Velde, CEO of ArcelorMittal Belgium, said the partners set out to better understand how carbon capture can be incorporated into existing steel plants, and that scaling up the technologies needed for decarbonisation is the vital next step. Tatsuto Nagayasu, senior vice president and head of CCUS at MHI, called the combination of more than 4,500 operating hours and capture rates above 90% an important milestone for applying the technology in the steel industry, and said the hot strip mill phase would strengthen understanding of integrating capture across multiple emission sources at an operating works.

Dr. Ben Ellis, vice president of marketing sustainability at BHP, said the results demonstrate the abatement potential of the blast furnace and integrated steelmaking route, noting that around 70% of global steel production comes from blast furnace steelmaking today and that the route is expected to remain key for decades. Tadashi Mizuno, managing director and CEO of MDP, said the phase 1 outcome strengthened confidence that carbon capture on blast furnace gas could be a viable pathway for reducing steel sector emissions, alongside energy efficiency improvements and the use of high-quality raw materials.

Reported by Alessandra Ricci, Polymer Testing, Circularity and Sourcing Analyst.