3T-AM’s Newbury factory still spends most of its time on new products, but the business now depends on repeat production. Commercial director Eddie Andrews, who joined in November 2021, says around 70% of revenue comes from production while new product introduction consumes roughly 80% of the team’s time. That mismatch is the central tension in the company’s move from prototyping to production supply.
When Andrews arrived, 3T-AM could make a one-off metal component for hundreds of customers. The harder task was winning the same order again, at the agreed price and on schedule. His framing was blunt: “How do you make that boring?” The answer has involved narrowing the customer base, simplifying accumulated procedures and changing who takes responsibility for a job. Semiconductor customers generate the strongest demand, followed by energy, then space and defence. Aerospace remains central to the company’s plans, but 3T-AM has found work for its machines while it waits for more aerospace programmes to reach suppliers at volume.
From prototype shop to production system
3T-AM dates its business to 1997 and received its first metal machine around 2008. By the 2021 reset, years of accommodating individual prototype jobs had left process after process on the shop floor. The company gave larger accounts more influence over what it developed and focused on operations it could reliably repeat, even though much of the work remained manual.
Ownership changed alongside equipment. Previously, the first person to see a drawing was often the engineer responsible for printing it, so the immediate question was how to print the part. Decisions at that stage shaped the work handed to everyone else. Today a product owner is responsible for delivering the finished component, and print and machining specialists agree on the condition of the part as it passes between operations.
That operational change sits beside a harder commercial one. “To become a successful additive manufacturer, you need to be a really good CNC machining company,” Andrews said. Bringing machining in-house gave the SME more control over cost, quality and delivery dates, while larger multi-laser machines improved productivity at the printing stage. Neither investment alone could tell a customer when a finished part would arrive.
The timing was not linear. Production orders rose and then tapered off; turning away too much prototype work during the upswing would have left gaps when demand eased. Repeat orders now give 3T-AM room to choose development jobs, though some will never become production contracts. Andrews’ point is that participation matters: without taking part in the journey, the manufacturer does not find out what can scale.
Capacity bought against demand
SBO, an Austrian precision manufacturing group, acquired 3T-AM in October 2025. The Newbury business had generated around £5 million in sales in 2024. SBO brought experience in machining downhole drilling equipment, including components up to ten metres long, and was interested in 3T-AM’s metal printing expertise and access to a different set of industrial customers. SBO approved a five-year business plan and, Andrews recalled, asked whether it could be done quicker.
In August 2026, the group reported that 3T-AM had added an EOS M400 in the second quarter, ordered another printer and invested further in post-processing. Those purchases formed part of a seven-printer expansion across UK and US operations. Previously, 3T-AM might have bought an M400 to try a different material and see what business it could develop; today, customer programmes account for the capacity of incoming machines before they reach the factory. “The investment is quite boring, actually,” Andrews said.
A full order book makes the next machine easier to justify, but it leaves little time on that machine to qualify a different material or develop a new product. Andrews wants to preserve two distinct reasons to invest: contracted demand and the work 3T-AM cannot yet offer. A pre-pandemic aerospace enquiry illustrates the scale of a production commitment. A single family of parts would have required 16 multi-laser systems to cover only a share of the requirement, and Andrews sees floor space, capital and capacity as reasons why original equipment manufacturers still keep sizeable additive programmes in-house.
What the customer can measure
For some customers, replacing a casting with a printed part earns its keep through lead time alone: a legacy or development programme can obtain a component sooner, even at much the same unit cost. At higher volumes the calculation gets tougher. Machine maintenance contracts and consumables weigh on the hourly rate, and a single-shift factory has fewer productive hours over which to spread those costs. Andrews sees scope to learn from CNC shops that operate around the clock. One place he would look for automation is support removal, where the process can still depend on what an experienced operator knows about a particular job.
A project with Honeywell Aerospace will test another claim. Under an Aerospace Technology Institute-funded programme, the partners are converting an existing conventionally manufactured component to additive. The sustainability team at the NCC in Bristol is carrying out a 12-month life-cycle assessment covering manufacture, service and end of life. Printing closer to the finished shape should use less feedstock and leave less metal to machine away than starting with billet. The study will compare the two manufacturing routes alongside any benefit the redesigned component delivers in service.
3T-AM is also connecting its factory and enterprise systems and developing digital product passports to document the carbon associated with making an individual component. By the end of 2028, Andrews wants that information to come with every part at no extra charge. For a customer compiling a supply-chain emissions report, it would become one more thing to expect from a routine order.
What the transition shows
The 3T-AM case suggests that production additive manufacturing is less about a single breakthrough than about repeatability, ownership, machining capability and a visible order book. The limits are equally clear. New products still absorb most of the team’s time, high-volume economics depend on utilisation, and aerospace volume remains a waiting game. The company’s argument is not that printing has replaced conventional manufacturing. It is that a contract manufacturer can make additive production predictable enough to be boring—and that boring may be the commercial milestone.
